To change the panel’s network configuration, it is necessary to enter the panel through the IP from a browser. From this software, you can configure both the wired network and the Wi-Fi network.
Network via cable
- Enter the “network via cable tab”
- Place the data with which you want to work on the wired network.
- Click on “Save”
Network via Wi-Fi
- Enter the “Wi-Fi” option.
- Write the SSID of the modem to which the panel will connect and the password of the modem (It is recommended to do it manually to avoid communication conflicts).
- Click on “Save”
NOTE: The panel only supports communication Wi-Fi for 2.4 GHz it does not support 5 GHz communication.
If the procedure was done properly, in the list of available networks it will change from “Connect” to “Disconnect” (to see the change reflected, sometimes it is necessary to change the tab and re-enter).
