AX Hub (Panel)
- Turn ON the panel
- Wait about 50 seconds
- After hearing the first audio message press the reset button
- Keep the button pressed for about 10 seconds until the audio system stops
- The panel will reset and with this, we finish the reboot
PIR Sensor
- Remove the front cover and remove the battery. Press the “LEARN” button and connect the battery again while still pressing the button.
- Wait about 10 or 15 seconds and release the button.
Magnetic contact
- Remove the front cover and remove the battery. Press the tamper button and place the connect the battery again do not release the button.
Remote control
- Open the control and remove the battery. Press the lock button (armed) and place the button again while still pressing the button.
- The control will blink 3 times with a red light indicating that it resets correctly.
Indoor siren
- Remove the front cover then remove the batteries from the device, press the “LEARN” button (indicated by the image), while still pressing the button place the batteries again.
- Wait till the light blinks 3 times with a red light indicating that it resets correctly.
Outdoor siren
- Remove the front cover and remove the device’s batteries, press the “LEARN” button (indicated by the image), while still pressing the button place the batteries again.
- Wait till the light blinks 3 times with a red light indicating that it resets correctly.
Water detector and temperature detector
- Remove the front cover and remove the battery, press the “LEARN” button (indicated in the image), while still pressing the button place the batteries again.
- Wait till the light blinks 3 times with a red light indicating that it resets correctly.
Smoke Detector
- Remove the front cover and remove the battery from the device, press the “test” button (indicated in the image), while still pressing the button place the battery again.
- Wait till the light blinks 3 times with a red light indicating that it resets correctly.
